Ultrasonic energy meter to fit in DN15 – DN50 hot or cold water pipework. Can be fitted in either supply or return pipework. Designed for nominal flow range between 0.6 – 15 m³/h. Approved to EN 1434 and MID Class 2. Consists of a calculator and ultrasonic flow sensor assembly, supplied with matched Pt 500 […]
To serve meters fitted with an M-Bus interface, with application in systems for heating, cooling, mains water, electricity and gas. Conforms to EN 13757-2 and -3. Protected to IP67. (Can also work with non-Kamstrup meters). Harvested data needs to be fed to an associated local PC. Provides the power supply to meter M-Bus modules. Export […]
A combined M-Bus Master and Level Converter. Standard supply includes 256 Mbyte mass storage memory, good for 500,000 device readouts. Does not need an additional PC. Non-memory version also available as repeater. Supplied in any of 4 different sizes, to serve either 25, 60, 120 or 250 M-Bus meters. Can be cascaded by repeaters to […]
Multi-layered flexible piping for HVAC connections. It consists of a longitudinally butt-welded aluminium pipe (serving as oxygen barrier), encased between 2 layers of polypropylene plastic (internal layer for low friction, external layer for corrosion resistance). Can withstand a maximum operating temperature of 95˚C and operating pressure of up to 12 bar. End connections are made […]
A “U” shaped manifold, with a normally shut full-bore flushing isolator in the connecting baseline. Each manifold branch comes with integral isolators, ready for connection to radiator supply and return lines. The inlet leg is protected by inlet isolator, automatic air Vent (AAV) and drain. The outlet leg comes with manual air vent, drain, flow […]
These are multi-port manifolds to cater for household services, one each for domestic hot water and boosted cold water respectively. Manifolds have integral isolators for the branch lines, with end isolators and end caps as required. Manifolds can be supplied separately or yoked together by metal brackets. Assembly at Works is followed by hydraulic testing, […]
Ceiling-mounted pipe distribution hubs, which can each serve up to 7 Fan Coil Units (FCUs). Commissioning Modules (CMs) are supplied in vapour-sealed rectangular boxes and comprise the following: Selectable flushing pathways for ease of commissioning Self-balancing pressure controls between FCU circuits Ultrasonic energy meters for soft landings and in-service monitoring CMs are offered […]
This arrangement is based on a 50 mm dia inlet manifold with multiple integral isolators, each leading to a branch. Branches are supplied with water meters (or not, in the case of units installed in the Thames Water catchment area), together with isolators, flow measurement points and NRVs. The inlet manifold is provided with inlet […]
Self-acting HIU for Indirect DHW / Indirect space heating, served by separate heat sources. Ratings to be confirmed by discussion, using either standard or bespoke solutions. Used mostly for developments with multiple dwellings. Includes pressure-compensated thermostatic control, warming standby flow controller, motorised isolator, wiring box, strainer, circulating pump, 2 spacer pieces for energy meters, sheet […]
Self-acting HIU for Indirect DHW / Indirect space heating. Ratings to be confirmed by discussion, using either standard or bespoke solutions. Used mostly for developments with multiple dwellings. Includes flushing bypass, pressure-compensated thermostatic control, Danfoss IHPT flow controller for warming standby flow (with setback), motorised isolator, wiring box, strainer, circulating pump, spacer piece for energy […]
To search for documents, please visit Downloads and use the search function / filters on that page.
Provide us with the relevant information in the form and our team will reach out to you
